Rupert Neve Designs Shelford 5052 Mic Pre / Inductor EQ

Beperkte voorraad. Wees er snel bij.

Omschrijving:
De Shelford 5052 weerspiegelt de 1073-functies met een microfoonvoorversterker, high pass filter en 3-bands inductor-EQ, plus moderne mogelijkheden zoals de variabele Silk / Texture-regeling en gelijktijdige pre / post "tape" -saturatie. Gebruikmakend van klasse-A, discrete, +/-24V-topologieën met op maat gewikkelde transformatoren en inductors, ontwierp Rupert Neve de 5052 als een channelstrip die de ziel van zijn klassieke ontwerpen vastlegt - zonder compromissen.

De 5052 past in de 2-way Wood Rack. Let op: Dit is geen 500 module! De module wordt geleverd zonder voeding.

Specificaties:

MIC / LINE
Selects between mic and line inputs.

TRIM
Continuously variable +/-6 dB level trim control.

TO EQ
Sends the mic preamp signal directly to the EQ when engaged.

MIC GAIN
A 12-way precision rotary switch controls gain from 0 to 66 dB in 6 dB steps.

SILK / TEXTURE
Pushing the Silk button cycles the Silk modes from Red to Blue to OFF. Silk reduces the negative feedback on the output transformer, adding harmonic content as the texture is increased. Red Silk accentuates the musical harmonic saturation from the mid and high frequencies, while Blue Silk accentuates harmonics from the low and low-mid frequencies. By manipulating the Texture control, the amount of Silk can be changed from essentially absent, to roughly 4-5% THD (mostly second order) depending on how hard the output transformer is being driven.

HIGH PASS FILTER
The high pass filter is continuously variable from 20-250Hz and engaged by the HPF switch, which illuminates when engaged. It is a valuable aid in any signal chain, but particularly so in a microphone preamplifier. Signals below the selected frequency are attenuated at a rate of 12db / octave, getting rid of proximity effect, building rumble, air handling, motor hum, etc.

HPF
12dB/octave High Pass Filter, variable from 20 - 250 Hz.

HIGH FREQ
+/- 15dB, Shelf or Peak, selectable at 8 kHz to 16 kHz.

MID FREQ
+/- 15dB with 6 center frequencies; 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz, with MID HI Q switch to narrow the bandwidth or increase the Q of the filter.

LOW FREQ
+/- 15dB, Shelf or Peak, selectable at 35 Hz, 60 Hz, 100 Hz or 220 Hz.

+48V
Engages phantom power on the microphone input

POLARITY
Push button inverts the polarity of the signal path, and illuminates when engaged. The symbol “Ø” is often used to denote opposite polarity.

LEVEL METER
An eight-segment LED bar-graph meter displays output level (pre-Silk). The color range proceeds from green for lower level signals, yellow for intermediate signals, and red for high levels. When the 5052 is clipped, the highest red LED will hold longer depending on how far above the clip threshold the signal was.

Alle prijzen zijn inclusief BTW.